The easiest way to restore yellow headlights or foggy headlights! Works in 2 minutes!
Try our basic restoration kit which includes everything you need for perfectly clear headlights.
Easy and simple to use with 3 easy steps.
1. Clean 2. Dry 3. Coat
STEP 1. CLEAN:
Do not unfold wipe #2!!!
- *Do not allow ‘Part 1’ wipe solution to dry on the lens. If Part 1 Solution does dry on the lens, use a damp cloth to wipe clean and re-dry using paper towel/a dry cloth. *
- Avoid any exposure to water and do not wash car for at least 24 hours or until fully cured.
- Do not touch headlights until fully cured
- To speed up drying process, turn on headlights to full-beam or use a hairdryer/ heat gun held at an arm’s length.
Q. How long will Headlight Restore Wipes last on my Headlights?
A. Headlight Restore Wipes will last from 6 to 12 months.
Q. Will Headlight Restore Wipes damage my paintwork?
A. No. There is nothing abrasive or corrosive in these wipes, so the paintwork will not be affected. If you do get any of the solution onto your paintwork you can wipe it of with some paper towel. If the solution has dried, use the Part 1 wipe to reactivate the solution and wipe off with paper towel.
Q. Will Headlight Restore Wipes work on glass headlights?
A. No, Headlight Restore Wipes will only work on Polycarbonate (plastic) headlights.
Q. How long does the UV coat take to dry?
A. Roughly 30-45 minutes. However the timing can differ depending on the ambient temperature when applying the wipe. However it is recommended to keep headlights away from water for at least 24 hours.
Q. Can I speed up the drying process?
A. The best way to speed up the drying process is to turn on the high beams. This will generate heat from the inside of the headlight lens and speed up drying times. This can also be paired with the use of a heat gun/hairdryer held about 30cm to further speed up drying time.
Q. Should I wear gloves to use Headlight Restore Wipes?
A. For overall safety reasons, yes we do recommend wearing gloves.